EZ Shop
Brand New
Favorites
Clearance
Bestsellers
Designer Tools
News
Grant
FAQ
Corrections
Downloads
Article Archives
Site Map
Digital Crystal Catalog
Bead Shop
Catalogs
Coupons
Newsletters
Trend-E-Mails
Contact & About Us
Order Terms
International Terms
Términos y Condiciones
|
|
| |
Step 1: Cut 2 - 12" pieces of JW491330.
Step 2: On Each 12" strand add 2 - SM40 (or more or less to fit wrist), then feed both wires through 1 - D65PE.
Step 3: Then on each strand add 1 - B50006JOAB, 1 - P408S, 1 - B50006JOAB. String though IS136S. Then add 1 - B50006JOAB, 1 - P408S, 1 - B50006JOAB and feed both wires through 1 - D65PE.
Step 4: Then on each strand add 1 - B50006HYAB, 1 - P408S, 1 - B50006HYAB. String though IS136S. Then add 1 - B50006HYAB, 1 - P408S, 1 - B50006HYAB.
Step 5: Feed both wires through 1 - D997 Picture Frame Slider.
Step 6: Then on each strand add 1 - B50006LSIAB, 1 - P408S, 1 - B50006LSIAB. String though IS136S. Then add 1 - B50006LSIAB, 1 - P408S, 1 - B50006LSIAB and feed both wires through 1 - D65PE.
Step 7: Then on each strand add 1 - B50006TNAB, 1 - P408S, 1 - B50006TNAB. String though IS136S. Then add 1 - B50006TNAB, 1 - P408S, 1 - B50006TNAB and feed both wires through 1 - D65PE.
Step 8: On Each 12" strand add 2 - SM40 (or more or less to fit wrist).
Step 9: Add 1 - SCT1 to all 4 ends of stringing wire. Feed 2 ends through the 2 rings of P6073S double toggle ring and the other 2 ends through the 2 rings of the P6073S double toggle bar. Feed back through crimp tubes and several beads to anchor.
Step 10: Crimp down all SCT1's and cut off "feelers."
Step 11: Apply SB093 crimp covers over all crimp tubes SCT1's.
|
|