| |
Step 1: Cut JW491330 in 1 - 14" length.
Step 2: String 1 - S1040, 1 - TK115003, 1 - TK253003, 1 - BLM85 (large), 1 - TK253003,
1 - S1040. 1 - TK115003, then add TK131003 as many as needed to fit your wrist, 1 - TK115003 and
1 - S1040.
Step 3: Add 2 - SCT1 to each end.
Step 4: Cut 21808M into 3 different lengths (i.e. 1", 1-1/8", 1-1/2").
Step 5: Take 1 - SHP22 head pin and add 1 - S2.5, 1 - TK252001, 1 - BLX03, 1 - TK252001,
1 - S2.5. Fold head pin over and insert into 1-1/2" of 21808M chain, wire wrap and cut off excess.
Step 6: Take 1 - SF088, add 1 - TK131003, 1 - BLM85, 1 - TK131003. Fold head pin over and
insert into 1" length of 21808M chain, wire wrap and cut off excess.
Step 7: Take 1 - SHP22 head pin and add 1 - S2.5, 1 - TK115001, 1 - S2.5. Fold head pin over
and insert into 1-1/8" length of 21808M chain, wire wrap and cut off excess.
Step 8: Take 1 - SF088, open eye and insert top link of all 3 chains (finished steps of 5, 6
and 7) into it and close. Fold over and insert over jump ring 1 - SJSR86, wire wrap and cut off excess.
Step 9: Slip SJSR86 into the end that opens of S Clasp TK282203.
Step 10: Add 2 - SCT1 to each end of stringing wire, then finish slipping one end through
closed S Clasp TK282203 and the other end through the closed jump ring SJSR86, feed back through
several beads to anchor.
Step 11: Crimp down all 4 crimp beads SCT1's. Apply 4 - SB093.
Step 12: Trim "feelers."
|