EZ Shop
Brand New
Favorites
Clearance
Bestsellers
Designer Tools
News
Grant
FAQ
Corrections
Downloads
Article Archives
Site Map
Bead Shop
Catalogs
Coupons
Newsletters
Trend-E-Mails
Contact & About Us
Order Terms
International Terms
Términos y Condiciones
|
|
| |
Step 1: Cut 2 - 24" pieces of JW491330.
Step 2: String 1 - P4183 heishe, then 3 - B53014WO, repeat until done using 132 - B53014WO
and 45 - P4183 heishe total (ending in heishe).
Step 3: String 1 - P4183 heishe, then 5 - B53014CITAB, repeat until done using 140 - B53014CITAB
and 29 - P4183 heishe total (ending in heishe).
Step 4: Take 1 - SF085 eye pin, slip pin through 1 - C911W Millefiore round, fold eye pin over
as if you were going to start to wire wrap but don't complete the wire wrap. Slip folded over eye pin
through bottom link of 22808F chain, now finish wire wrapping and cut off excess of eye pin. Count off
6 links of 22808F chain and then cut chain. Repeat this step 13 times. (**EXCEPTION**)
Step 5: Open eye pin SF085 @ bottom and attach to 1 link of 22808F chain. Close eye pin.
Step 6: (**EXCEPTION**) To close on top ring of B3772AB, slip chain through ring and then wire
wrap eye pin through each end link of chain and finish wire wrapping.
Step 7: To close on bottom ring B3771AB, slip chain (both ends) through, open eye pin, attach
end links of chain and close eye pin.
Step 8: On one end of stringing wire containing both the B53014WO and B53014CITAB, slip on 1
SCT1 crimp tube, then slip stringing wire through B3771AB ring, push back through SCT1 and feed back
through several crystals to anchor. Crimp down and trim off "feelers."
Step 9: On the other end of both strands containing B53014WO and B53014CITAB, slip on 1 -
SCT1 crimp tube and slip stringing wire through hole of P20975 sun charm, push stringing wire back
through crimp tube and several crystals to anchor. Crimp down and trim of "feelers."
Step 10: Apply crimp covers SB093 over all crimp tubes SCT1.
|
|
