| |
Step 1: Take 1 - SHP22 and add 1 - B50006LS, wire wrap to top inside ring of twist ring
STW593. Cut off excess headpin.
Step 2: Take 1 - SHP22 and add 1 - B50006LS, 1 - P5571S, 1 - P5544S, 1 - P5571S, and
1 - B50006WO. Repeat 2 times. Wire wrap to 1st and 3rd bottom rings of STW593.
Step 3: Take 1 - SHP22, add 1 - B50006LS, 1 - P5571S, 1 - HF5RU, 1 - P5571S and 1 -B50006WO.
Wire wrap to middle bottom ring of STW593.
Step 4: Open ring of 1 - SF085 eye pin, slip finished STW593 through and close. Then on eye
pin add 1 - P5544S and wire wrap to ring of S222 drop tube.
Step 5: Cut 18" red satin ribbon and run through S222 drop tube bead, center ribbon.
Step 6: Open tabs of S9805 ribbon hook and end, apply drop of SB1000 Starbond Glue, press
down ribbon ends and fold over tabs of S9805.
|