| |
Step 1: Cut 1 - 12" piece of JW491330.
Step 2: Add: 2 - SM40 (or however many or few to fit wrist), 1 - TK250010B, 1 - B50408,
1 - TK250010B, 1 - SB892, 1 - TK250010B, B50408, 1 - TK250010B, 1 - SM40, 1 - ISQ6S, 1 - B56018,
1 - ISQ6S, 1 - SM40, 1 - B560110, 1 - SM40, 1 - ISQ6S, 1 - B56018, 1 - ISQ6S, 1 - SM40, 1 - TK250010B,
1 - B50408, 1 - TK250010B, 1 - SB892, 1 - TK250010B, 1 - B50408, 1 - TK250010B, 2 - SM40 (or however
many or few to fit wrist).
Step 3: Cut 1 1/2" - 2" of 216FIG1 chain. Slip chain through 1 - CLP06. Slip both ends of
216FIG1 chain through 1 end of stringing wire.
Step 4: Add 1 - SCT1 to each end.
Step 5: Slip 1 end of stringing wire through bar of S112 and the other end of stringing
wire through ring of S112. Slip back through SCT1's and feed back through several beads to anchor.
Step 6: Crimp down SCT1's and cut off "feelers".
Step 7: Apply SB093 crimp covers over SCT1's.
|