EZ Shop
Brand New
Favorites
Clearance
Bestsellers
Designer Tools
News
Grant
FAQ
Corrections
Downloads
Article Archives
Site Map
Bead Shop
Catalogs
Coupons
Newsletters
Trend-E-Mails
Contact & About Us
Order Terms
International Terms
Términos y Condiciones
|
|
| |
Step 1: Start with the P3078S (three hole link) and the SJ106 (open jump ring). Just
start linking the spacer with the jump rings together best to start in the middle. Just work
with them till you like the look useing around 28 links all together with around 36 jump rings.
This part measures around 10 inches.
Step 2: Then start putting the crystals in the places you would like with the color
combination you like. Use the SHP21.5 headpin to place the crystals on. Put the B6744LS -
flower drop in the center of your Choker. Place B6744LS on the SF085 eyepin.Open up loop to
put the flower on and on the pin put a 4mm crystal color of your choice.
Step 3: Attach the chain 2907A on the Choker with the SJ106 open jump rings. Around
3 inches on each side. Last thing to do is to take the clasp the TK282202 and attach to one
side. You can put a jump ring at the end or just use one of the links to fasten the hook.
You will be able to ajust the Length that you would like.
|
|