| |
Step 1: Cut 3 - 12" pieces of JW4913100.
Step 2: Take 1 - 12" piece of JW4913100, add 2 - GF1030, 1 - P5570GA, 1 - B53018TAB,
1 - P5570GA, 1 - GF1030, 1 - P5567GA, 1 - B50008GS, 1 - P5567GA, 1 - GF1030, 1 - P5570GA,
1 - B53018TAB, 1 - P5570GA, 1 - B6012GS, 1 - P5570GA, 1 - B53018TAB, 1 - P5570GA, 1 - GF1030,
1 - P5567GA, 1 - B50008GS, 1 - P5567GA, 1 - GF1030, 1 - P5570GA, 1 - B53018TAB, 1 - P5570GA,
1 - B6012GS, 1 - P5570GA, 1 - B53018TAB, 1 - P5570GA, 1 - GF1030, 1 - P5567GA, 1 - B50008GS,
1 - P5567GA, 1 - GF1030, 1 - P5570GA, 1 - B53018TAB, 1 - P5570GA and 2 -GF1030.
Step 3: Take 1 - 12" piece of JW4913100, add 1 - B53014IR, 1 - P408C, 1 - B53014IR,
1 - P5567C, 1 - B50008ST, 1 - P5567C, 1 - B53014IR, 1 - P408C, 1 - B53014IR, 1 - P5570C,
1 - B53018ST, 1 - P5570C, 1 - B53014IR, 1 - P408C, 1 - B53014IR, 1 - P5567C, 1 - B50008ST,
1 - P5567C, 1 - B53014IR, 1 - P408C, 1 - B53014IR, 1 - P5570C, 1 - B53018ST, 1 - P5570C,
1 - B53014IR, 1 - P408C, 1 - B53014IR, 1 - P5567C, 1 - B50008ST, 1 - P5567C, 1 - B53014IR,
1 - P408C, 1 - B53014IR, 1 - P5570C, 1 - B53018ST, 1 - P5570C, 1 - B53014IR, 1 - P5567C,
1 - B50008ST, 1 - P5567C, 1 - B53014IR, 1 - P408C, 1 - B53014IR, 1 - P5570C, 1 - B53018ST,
1 - P5570C, 1 - B53014IR, 1 - P408C, 1 - B53014IR, 1 - P5567C, 1 - B50008ST, 1 - P5567C,
1 - B53014IR, 1 - P408C and 1 - B53014IR.
Step 4: Take 1 - 12" piece of JW4913100, add 3 - S1030 - 1 - P5631, 1 - P5567S,
1 - B50408LCT, 1 - P5567S, 1 - P5544S, 1 - P5570S, 1 - B50008WO, 1 - P5570S, 1 - P5631,
1 - P5567S, 1 - B50408LCT, 1 - P5567S, 1 - P5544S, 1 - P5570S, 1 - B50008WO, 1 - P5570S,
1 - P5631, 1 - P5567S, 1 - B50408LCT, 1 - P5567S, 1 - P5544S, 1 - P5570S, 1 - B50008WO,
1 - P5570S, 1 - P5631, 1 - P5567S, 1 - B50408LCT, 1 - P5567S, 1 - P5544S, 1 - P5570S,
1 - B50008WO, 1 - P5570S, 1 - P5631, 1 - P5567S, 1 - B50408LCT, 1 - P5567S, 1 - P5570S,
1 - B50008WO, 1 - P5570S, 1 - P5631, 1 - P5567S, 1 - B50408LCT, 1 - P5567S and 3 - S1030.
Step 5: Take all 3 strands of JW4913100 of all one end of bracelet and feed through
2 - GFCT1's, then feed all three strands through toggle (P6061C) ring and back through the
2 GFCT1's.
Step 6: Repeat above, only with the other end and feed through the toggle bar and
back through.
Step 7: Crimp down all 4 GFCT1's and apply 1 - GB093 over each crimped tube.
Step 8: Cut off "feelers".
|
