EZ Shop
Brand New
Favorites
Clearance
Bestsellers
Designer Tools
News
Grant
FAQ
Corrections
Downloads
Article Archives
Site Map
Bead Shop
Catalogs
Coupons
Newsletters
Trend-E-Mails
Contact & About Us
Order Terms
International Terms
Términos y Condiciones
|
|
| |
Step 1: Start with 28" of the 7mm Charm Chain (4403).
Step 2: Take the CB604.- For each hole take the GF085 - (eyepin)
A: 1st eyepin -Place the CB340 on ring of eyepin. On pin put CB105-
B53014IRAB - CB103- Loop and Wrap into first hole.
B: 2nd eyepin place the CB39 on ring of eyepin. On pin put CB105 - CB480 - B56016VM
CB105. Loop and wrap headpin.
C: 3rd eyepin Copy the 2nd (above)
D: 4th eyepin copy the 1st eyepin instructions.
Lay this chain aside.
Step 3: Take 21" (43313) Heavy Cable - You will divide the chain in the sections that you would like.
Make sure that each side of your chain will be equal in lengths.
A: The section of chain in center.Each side of chain piece. CB105 - B53014IRAB - CB105.
B: Next section of chain on each side of necklace. CB103 - CB480 - B56016VM - CB480 -
CB103 - B53014ISAB - CB103
C: Next section of chain on each side of necklace. CB103 - B53014ISAB - CB103 - CB480 -
B56016VM - CB480 - CB103 - B53014ISAB - CB103
Step 4: In the center the 43313 Chain. You will want to place your drop. Take Eyepin (GF085)
put the B53014ISAB - CB480 - B53016VM - CB105 - wrap eyepin around the CB008.
Step 5: Last thing to do is put your Toggel and Bar on Both chains. Attach by using the eyepins (GF085).
|
|