EZ Shop
Brand New
Favorites
Clearance
Bestsellers
Designer Tools
News
Grant
FAQ
Corrections
Downloads
Article Archives
Site Map
Bead Shop
Catalogs
Coupons
Newsletters
Trend-E-Mails
Contact & About Us
Order Terms
International Terms
Términos y Condiciones
|
|
| |
Step 1: Cut 2 - 18" lengths of JW491830J.
Step 2: Open 1 - SJ117 (Jump Ring) and slip through the pendant ring of the BDA701
(foil heart pendant), gently close. Open another SJ117 (Jump Ring) and add 1 - TK181037
(Antique jump ring) and 1 - P5637 (Pewter beaded heart). Slip this through the jump ring
attached to the foil pendant heart and then through the bottom ring of the P5623 (Pewter
bail) and gently close.
Step 3: On first 18" length of the JW491830J string the decorated bail above and
then add: 1 - P40712 (Heishe), 1 - P5578S (Bead Cap), 1 BLM88 Bead, 1 - P40712, 1 - BLM88,
1 - P40712, 1 - BLM88, 1 - P5578S, 1 - TK161018 (Crown Bead), 1 - P5578S, 1 - BLM88,
1 - P40712, 1 - BLM88, 1 - P40712, 1 - BLM88, 1 - P5578S. Add 1 - SCT1 (2X2 Crimp).
Step 4: String through the bottom loop of the TK280090 (Heart link) and feed back
through the crimp again and back through several of the beads to secure.
Step 5: Repeat steps 3 & 4 above in mirror image on the other side of the bail.
Step 6: Crimp the SCT1's and cover each crimp with a SB093 (crimp cover). Cut off
any "feelers" left over of the Beadalon.
Step 7: Cut the remaining 18" of the JW491830J into 2 - 9" lengths.
Step 8: String: 1 - SCT1 (2X2) crimp, 1 - P5578S (Bead Cap), 1 BLM88 Bead, 1 - P40712
(Heishe), 1 - BLM88, 1 - P40712, 1 - BLM88, 1 - P5578S, 1 - TK161018 (Crown Bead), 1 - P5578S,
1 - BLM88, 1 - P40712, 1 - BLM88, 1 - P40712, 1 - BLM88, 1 - P5578S and 1 - SCT1 (2X2 Crimp).
Step 9: Repeat step 8 on the remaining 9" length of Beadalon.
Step 10: Cut the 14" of the 22207F chain so that you have 1 - 8" piece and 1 - 6" piece.
On the 8" piece of chain open and attach 1 - SJ117. Gently close. Open the other SJ117 and add
1 - P5637 (Beaded Heart) and 1 - TK181037 (Fancy Antique Jump Ring), slip this jump ring through
the first closed jump ring and gently close.
Step 11: On the 6" piece of 22207F chain take the S32516 (floating heart clasp) and
gently open the jump ring and attach to the end link of the chain, gently close.
Step 12: String the remaining 9" length to the top of the TK280090 (heart station)
and to a bottom link of the 22207F chain (the ends without the heart clasp or the antique
jump ring and beaded heart). Feed back through the crimps and several beads to secure. Crimp
down, add the SB093 (crimp covers) over the crimps, and cut off any left over "feelers" of
the Beadalon.
|
|
