EZ Shop
Brand New
Favorites
Clearance
Bestsellers
Designer Tools
News
Grant
FAQ
Corrections
Downloads
Article Archives
Site Map
Bead Shop
Catalogs
Coupons
Newsletters
Trend-E-Mails
Contact & About Us
Order Terms
International Terms
Términos y Condiciones
|
|
| |
Step 1: Make the pendant by placing one jade round (A157JD) followed by a
gold round (G14203) then the carnelian butterfly (A27CN) then another
gold round and another jade round on the headpin (GF5204). Loop the
top and connect it to a small length of chain (3905) using a large
jump ring (GJ106). Connect the small length of chain to the rest of
the chain with the other large jump ring.
Step 2: Counting up 5 links from
the pendant, cut the long length of chain. Using an eyepin (GF0241)
create a link with the carnelian round (A15CN) and
attach one end to the necklace, and the other end to the length of chain
that's been cut off.
Step 3: Counting up 5 links from the carnelian round, create a link in the
same fashion, only using the new jade butterfly (A27NJ) and attach one end
to the necklace and the other to the length of chain that's been cut off.
Step 4: Repeat steps 2 and 3 for desired effect.
Step 5: Repeat steps 2 and 3 on the other side of the necklace.
Step 6: Connect the each half of the magnetic clasp (GF151) using the
smaller jump rings (GJ95)
|
|