Supplies Needed:
- 31611F 2.5mm Flat Cable Chain - Approx. 26.5"
- (1) GF694 Toggle
- (1) GF693 Toggle Bar
- (4) GFHP02 Headpins
|
- (1) GF085 Eyepin
- (1) IT206R Large Heart
- (4) IT106R Small Hearts
|
|
Step 1.
Cut two 9.5" pieces of chain. Attach toggle loop to one piece and bar to the other using jump rings.
|
|
|
Step 2.
Connect loose ends of chain together using a jump ring.
|
|
|
Step 3.
Thread eyepin through large heart, wire wrapping at the top to create a loop.
|
|
|
Step 4.
Attach large heart charm to the jump ring in the center of your chain.
|
|
|
Step 5.
Thread headpins through small hearts, wire wrapping at the top to create a loop.
|
|
|
Step 6.
Cut one 1.5" piece of chain and attach a small heart charm to one end using a jump ring.
Repeat this step using a 1" piece of chain.
|
|
|
Step 7.
Attach loose ends of both the 1" and 1.5" chain/charm pieces to the eyepin loop at
the bottom of the large heart charm.
|
|
|
Step 8.
Cut remaining chain in half and attach it to the jump ring in the center of your
necklace. Connect the loose ends on both sides to the necklace using jump rings,
leaving a slight "sway" in the chain.
|
|
|
Step 9.
At those connections, attach the remaining 2 small heart charms using jump rings.
|
|
|
