|
Step 1: Create Dichroic bead stations by threading (1) Y21 bead through a 1.25" piece of 14ga wire.
Thread (1) SKS111 satin bead on each side of the Dichroic bead and loop the ends of the wire around
to form a single station. Trim excess wire. Repeat to create 16 pieces.
|
 |
|
Step 2: Cut (8) 1.5" pieces of 213BL sterling chain. Alternate attaching the chain and 7 of the
Dichroic stations using SJ635 jump rings, to form a continuous 18" strand.
|
|
|
Step 3: Cut (10) 1" pieces of 213BL sterling chain. Alternate attaching the chain and 9 of the
Dichroic stations using jump rings, to form a continuous 18" strand.
|
|
|
Step 4: Attach one end of each chain to the S32611 toggle ring using (2) jump rings.
|
|
|
Step 5: Attach loose ends of chains to toggle bar using (2) jump rings.
|
|
|
Step 6: Create toggle charm by threading (1) SKS111 satin bead and (1) Y21 dichroic bead onto a
SHBD215 headpin. Wrap end of headpin around to form a loop and trim excess wire. Attach charm to
SB11 sterling drop using a SJ635 jump ring.
|
|
|
Step 7: Using remaining 1" of 213BL sterling chain, attach charm to chain end using a jump ring.
Attach loose end of chain to toggle using remaining jump ring.
|
|
