|
Step 1: Cut in half. Twist GDW18H Wire into the link shape shown here.
|
 |
|
Step 2: Cut 3-1611F Chain into: (2) 4.5" strands &
(2) 3.5" strands. Using GJ36280 Jump Rings, attach each end of a
4.5 inch strand to the outer loops on your wire link.
|
|
|
Step 3: Repeat Step 2, using the 3.5 inch strands of 3-1611F Chain.
|
|
|
Step 4: Create components of center earring drop as shown, using (2) GF080
Eyepins, (1) GFHP21 Headpin, (1) B53014BZAB Bicone, (1) B50008SK Round, (1) B50408PO
Bead, and (1) B50004ST Round.
|
|
|
Step 5: Using (2) GJ36280 Jump Rings connect the 3 drop components.
|
|
|
Step 6: Using (1) GJ36280 Jump Ring, connect the center earring drop to the
center of the GDW18H Wire link.
|
|
|
Step 7: Create 2 drops using (2) GFHP21 Headpins, (2) B50006SK Rounds and
(2) B53014BZAB Bicones.
|
|
|
Step 8: Connect drops to each side of GDW18H Wire link, using (2) GJ36280
Jump Rings.
|
|
|
Step 9: Create a link using (1) GFHP21 Eyepin and (1) B50408PO Bead.
|
|
|
Step 10: Using (2) GJ36280 Jump Rings, connect one side of link to (1) GF43527
Earwire and the other to the center of the GDW18H Wire link.
|
|
|
Step 11: Repeat the above instructions to create the second earring.
|
|
