|
Step 1: Attach one end of a 17" strand of Beadalon to SG2622J clasp
using crimp.
|
 |
Step 2: Begin stringing assorted beads in this order, repeat until
you reach the end of the string:
- G66154 Gold-filled Corrugated Rondell
- B50006J 6mm Swarovski Round - Jet
- B505GAB 5mm Gold Plated Crystal Rondell
- B50006J 6mm Swarovski Round - Jet
- G66154 Gold-filled Corrugated Rondell
- BLM14A 8mm Wedding Cake Bead
- G66154 Gold-filled Corrugated Rondell
- B50008J 8mm Swarovski Round - Jet
- B506GAB 6mm Gold Plated Crystal Rondell
- G66154 Gold-filled Corrugated Rondell
- BLM14A 8mm Wedding Cake Bead
|
|
|
Step 3: Attach loose end of Beadalon to SG2622J using crimp.
You have now completed the first layer of your necklace.
|
|
Step 4: Create beaded stations shown here, using the following:
- G66154 Gold-filled Corrugated Rondell
- B50006J 6mm Swarovski Round - Jet
- BLM15A 6mm Wedding Cake Bead
- BLM14A 8mm Wedding Cake Bead
- GF085 Gold Filled Eyepins
|
|
|
Step 5: Attach (1) 6.25" section of 3-193F Gold Filled Chain to the
SG2622J clasp using a GJ64 Gold Filled Open Jump Ring.
|
|
|
Step 6: Using 7 more GJ64 Gold Filled Open Jump Rings connect
the stations in the order shown here.
|
|
|
Step 7: Using 1 additional GJ64 Gold Filled Open Jump Rings,
connect the end of your beaded chain to a 6.25" section of 3-193F
Gold Filled Chain.
|
|
|
Step 8: Connect the loose end of your 6.25" section of 3-193F
Gold Filled Chain to the opposite end of the SG2622J clasp. You have
now completed the second layer of your necklace.
|
|
Step 9: Create beaded stations shown here, using the following:
- G66154 Gold-filled Corrugated Rondell
- B50006J 6mm Swarovski Round - Jet
- B50008J 8mm Swarovski Round - Jet
- B506GAB 6mm Gold Plated Crystal Rondell
- BLM14A 8mm Wedding Cake Bead
- GF085 Gold Filled Eyepins
|
|
|
Step 10: Attach (1) 3.5" section of 3-16C8 Gold Filled Chain to
the SG2622J clasp using a GJ64 Gold Filled Open Jump Ring.
|
|
|
Step 11: Using a GJ64 Gold Filled Open Jump Ring, attach a
small Swarovski station to the loose end of the 3-16C8 Gold Filled Chain.
|
|
|
Step 12: Attach (1) 3.5" section of 3-16C8 Gold Filled Chain to the
loose end of your newly strung small Swarovski station, using a GJ64 Gold
Filled Open Jump Ring.
|
|
|
Step 13: Using a GJ64 Gold Filled Open Jump Ring, attach a large Swarovski
station to the loose end of the 3-16C8 Gold Filled Chain.
|
|
|
Step 14: Attach (1) 1.5" section of 3-16C8 Gold Filled Chain to the
loose end of your newly strung large Swarovski station, using a GJ64 Gold
Filled Open Jump Ring.
|
|
|
Step 15: Using a GJ64 Gold Filled Open Jump Ring, attach Wedding
Cake Bead station to the loose end of the 3-16C8 Gold Filled Chain.
|
|
|
Step 16: Attach (1) 1.5" section of 3-16C8 Gold Filled Chain to the
loose end of your newly strung Wedding Cake Bead station, using a GJ64 Gold
Filled Open Jump Ring.
|
|
|
Step 17: Using a GJ64 Gold Filled Open Jump Ring, attach a large
Swarovski station to the loose end of the 3-16C8 Gold Filled Chain.
|
|
|
Step 18: Attach (1) 3.5" section of 3-16C8 Gold Filled Chain to the
loose end of your newly strung large Swarovski station, using a GJ64 Gold Filled
Open Jump Ring.
|
|
|
Step 19: Using a GJ64 Gold Filled Open Jump Ring, attach a small
Swarovski station to the loose end of the 3-16C8 Gold Filled Chain.
|
|
|
Step 20: Attach (1) 3.5" section of 3-16C8 Gold Filled Chain to the loose
end of your newly strung small Swarovski station, using a GJ64 Gold Filled Open
Jump Ring.
|
|
|
Step 21: Attach (1) 3.5" section of 3-16C8 Gold Filled Chain to the SG2622J
clasp using a GJ64 Gold Filled Open Jump Ring. You have now completed the third
layer of your necklace.
|
|
|
Step 22: Finish off the crimp ends using GB093 Crimp Covers.
|
