|
Step 1: Take 3 different lengths of the Gold beading wire.
|
 |
Step 2: Start with the longest length.
a. Start in center with the A74207TZ put the crimps on each side (GB875)
b. Space as you would like with the color combination you would like. By each bead
you will need to put crimps to hold the bead in place.
|
|
Step 3: Make the 2nd strand shorter than first so there is enough space between
strands so beads lay flat.
a. Make beads so they are off set from first strand. You can come up with your own
sequence. Remember to put the crimps on each side of the beads.
|
|
Step 4: 3rd length is even shorter so again it must have space between strands.
a.Make this strand with the B53014LCTAB's and the AF46TL omitting the leaves. Make sure
to put your beads so they will off set the 2nd strand. Make sure again to put crimps on
each side of your beads.
b. This strand will be closes to your neck.
|
|
Step 5: Take your G38190 Lobster and attach each strand with the larger
crimp(GFCT1). Make sure to make a distance between strands.
On the other side of necklace put your jump ring and attach each strand
with the Crimp.
After putting crimps on each strand on each side, cover
the crimps with the largest crimp cover (GB095). Put all 3 crimps in
the one cover. Do this on each side.
|
|
