Sterling Silver 1.4mm Light Tight Curb Chain Footage. 10 Foot Minimum.
This tight curb chain has a bright sterling silver finish and 1.4mm wide links. Finish it however you like. Since the chain link Inner Diameter (ID) is too small for a jump ring to fit through, you’ll need to finish the ends by either soldering on sterling silver jump rings or soldering (or gluing) on one of our bead tips and ends. Finish the necklace by attaching a sterling silver lobster claw or spring ring as the jewelry clasp. For more information about finishing footage chain, read our blog post Tips for Chain End Finishing. It will guide you through the types of jewelry chain ends and closures to solder on.
Nation Of Origin: Italy
Manufacturing Method: Machine Made
Anti Tarnish: Yes
Weight: 0.121 Grams per Inch
Notes: Chain link inner diameter is too small for a jump ring, must solder on ends or crimp and glue. Bulk chain is priced per inch. All chains are sold in 12 inch minimum quantities unless a 10 foot minimum is noted. We may use segments of 7 inches or longer to fulfill your order if continuous lengths are not available. Spooled lengths are segmented at the factory so we cannot guarantee continuous lengths of any specific measure.
|Link Width Diameter:||1.40mm|
|Grams per Inch:||0.121g|
|Embellishment Width Diameter:||n/a|