Easy as One – Two – Three.  Our 14/20 Yellow Gold-Filled Snap-In Settings with a .7mm Post Thickness.  For that crisp, professional look in jewelry making.  Use your own calibrated stones or our selection of loose CZs. One: Lay your stone face down on a clean, flat even surface. Two: Position the Snap-In setting over the stone. And Three: push down gently and evenly. This will cause the prongs of the setting to spread apart and then snap closed over the table of the stone, securing it in place. Pressing on two opposing prongs at a time, gently tighten the prongs around the stone as needed. Easy, peasy. You will be setting your own stones in a flash.

Posts & Clutches
Post And Clutches Type	Setting
Clutches Included	No
Post Thickness MM/Inch	.69mm/ .027"
Stone Size	3mm
Post Ornament MM Size	3mm
Size SML	Extra Small