This gold filled cable chain is stretched or "drawn" so it is extra slim for use in stringing applications. Add beads with holes 1mm or larger for a high end beading design. The wholes in this jewelry chain are too small to accomodate gold filled jump rings. We recommend finishing with crimp or solder ends instead. Soldering gold filled is extremely tricky so you don't burn off the exterior gold layer. Please seek specialized training and practice before soldering your final designs. Scroll down for compatible findings for finishing with a crimp end cap. 

Note: Bulk chain is priced per inch. All chains are sold in 12 inch minimum quantities unless a 10 foot minimum is noted. We may use segments of 7 inches or longer to fulfill your order if continuous lengths are not available. Spooled lengths are segmented at the factory so we cannot guarantee continuous lengths of any specific measure.