XS20M
70 Medium 20 gauge Silver Solder Wire. Sold in pre-cut 12 inch segments. Cadmium free.
70 Medium 20 gauge Silver Solder Wire. Sold in pre-cut 12 inch segments. Cadmium free.
CAUTION:
Brazing may produce fumes and gases hazardous to health. Avoid breathing these fumes and gases. Use adequate ventilation. See ANSI Z49. 1*, Safety i Welding and Cutting, published by the American Welding Society. *ANSI Z49.1 (Safety in Welding and Cutting) is published by the American Welding Society, 550 N.W. 42nd Ave., Miami, FL 33126.
Nation Of Origin: United States
Anti Tarnish: No
Tariff Code: 7106.92.5000
Weight: 1.530 Grams per Foot
Notes: Melting point: 1275 degrees f, flow point: 1360 degrees f. Segments are pre-cut.
Anti Tarnish: No
Tariff Code: 7106.92.5000
Weight: 1.530 Grams per Foot
Notes: Melting point: 1275 degrees f, flow point: 1360 degrees f. Segments are pre-cut.
Write A Review
Must be logged in to write a review
from Brenna Kohlhase (2 years ago)
I use this solder for almost every situation. You can hammer it flat if you need sheet solder and roll it up in a coil for easier handling. I was taught to make a crude "m" or just two small hills at the end of the wire and you'll always know what solder you're using. Solder becomes one grade harder after flowing so you can actually use this for 2 steps and still use easy for repairs, etc.
